Easy-to-follow Guide to Installing a New Shower Unit

Get A Free Quote

In this article in the next paragraph you can discover a good deal of excellent insights concerning How to Install a Shower Enclosure .

An effective shower setup requires mindful planning and also a lot of job. For the most part, you will require to do three kinds of jobs: framing wall surfaces, setting up the plumbing, and also completing wall surfaces.

Preparation

To start with, you need to decide on the kind of shower that you want to install. It is very important to determine whether the picked shower can coping with specific systems and can control a secure level of water with the central heating boiler. Many shower devices nowadays are developed to be versatile to various water pressures (such as kept warm water and chilly keys).
It is also essential to think about the water pressure as well as the preparation of the piping and also drainage for the shower

Different Kinds Of Shower Units

Push-on Mixer: The tube and spray parts of the push-on mixer shower system can be linked to the bathroom faucet as per your requirement, as well as the water temperature level can be readjusted via the taps. Push-on mixers are cheap as well as very straightforward to install. However, although the hose pipe connection is basic, it is conveniently displaced. In addition, it is inconvenient to adjust the temperature.

Bath/Shower Mixer: The hose pipe and also spray of this kind of shower are integrated with a bathroom mixer faucet, as well as the temperature can be readjusted through the bath taps. It is a very affordable alternative and also no added plumbing is entailed. Nonetheless, the bath/shower mixers also suffer from bothersome temperature level control alternatives.

Guidebook Mixer: The tube and also spray of a hand-operated mixer shower device belong of the wall surface unit and the cold and hot water products are attached to a solitary shutoff The temperature and pressure of the water are managed with either one or a variety of knobs (in more pricey showers). Although temperature level control is much easier in manual mixer types, they are more expensive than the formerly stated mixers. They likewise need additional plumbing of cold and hot water pipes.

Thermostatic Mixer: The hose pipe and spray of this shower kind are a part of the wall surface device as well as the hot and cold water products are attached to a solitary valve here also. It is total with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from ending up being as well warm. Among the most significant benefits of a thermostatic mixer shower kind includes hassle-free temperature control. Nevertheless, it is one of the most costly of the different mixer choices.

Power Shower: A power shower is a single device including an effective electric pump that is capable of modifying both the water pressure and temperature level. This type of shower can be fitted if there is water system from a cold water cistern as well as a hot water cyndrical tube. A power shower makes the modification of both stress as well as temperature level simple. On the other hand, it disagrees for water heated straight by the shower or where the water is supplied by a mix boiler under keys pressure.

Electric Shower: An electric shower is plumbed right into a mains cold water supply as well as it heats the water electrically. It is important to note that for this shower kind to be installed, the mains stress needs to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The unit permits the temperature as well as stress to be adjusted by means of a handle. Models with temperature stabilisers are much better as they stay unaffected by various other faucets in other places in use within the family. A major downside of electric showers is that the control knob just enables the option of heats at less stress, or reduced temperature levels at a greater pressure. This is bothersome in the winter when the spray is frequently weak as well as the keys water is chillier. Nonetheless, this trouble is tackled in some models which are available with a winter/summer setting.

Technique

Depending upon the kind of shower you want to set up, the shower head need to either be suited order to prevent its contact with the water in the bath below or the base tray, or it should have a check valve.
Before beginning, it is advisable to mark the positions of the shower head and control, and to plan the pipe-work involved. Additionally, the drainage system to eliminate the drainage will need to be planned. Both positions of the cable course and also the shower button will also require to be taken into consideration if a rapid or electrical shower system is being set up.
Use the instruction overview offered with the shower unit to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is essential to cut off the water. In order to shield the pipes, they need to be offered a water resistant covering and additionally fitted with separating valves. The pipelines can then be hidden right into the wall and also glued over to neaten the overall appearance.
Fit the base tray, shower head, as well as fittings.
Attach the major shower control to the pipelines that will be providing the water (This may call for a female screw string adapter).
Reconnect the water system and test the pipes for any type of leaks, as some might need firm.
If you are installing an electric shower, remember to turn off the electricity supply prior to making any electric connections. When these links have been made (there need to be support within the user's manual), the power supply can be switched back on.

Changing Water Stress to Fit Your Shower

The cold water storage tank can be lifted to a higher elevation (in some cases as little as 150mm (6inches)) by fitting a strong wooden support below it - perhaps composed of struts and also blockboards. If you select this alternative, the major as well as distribution pipes will certainly likewise have to be increased to satisfy the new height of the reservoir.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is selected, it has to be connected right into the power supply in order to run.

Piping as well as Water drainage

It is best to utilize 15mm size supply pipes, and make the runs to the shower as short as well as straight as feasible so regarding preserve maximum pressure and minimise heat loss. In addition, by reducing using elbows for pipeline corners, you can reduce the resistance in the flow of the water system. You can attain this by flexing the pipes rather.

Most Common Blunders

Breaching or disregarding neighborhood code constraints.

Using pipes that are as well tiny.

Attaching copper to galvanized without using a brass or dielectric suitable between the two.

Not utilizing tape or pipe compound at threaded joints.

Not leveling your fixtures when mounting them.

Not installing an air gap loading for components.

Cutting supply stub outs as well brief to mount the shutoff valves onto after the ended up wall remains in area.

Not properly lining up tubing into installations or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes goes to an angle will certainly create a leakage.).

When turning the water back on in your house, constantly run the outdoors tube valve or purge your bathrooms to bleed dust as well as air from the lines. This debris can cause troubles in your sink taps and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you liked our post on How to Install a Direct-to-Stud Shower Enclosure. Thanks a ton for spending some time to browse our blog. Loved our content? Please share it. Help others find it. Thanks so much for going through it.

Schedule Appointment